Safety record in brief:2 NTSB accidents (substantial damage at worst, latest Sep 1998)6 ADs may apply
We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Individual owners are shown by city and state only.
The failure of the pilot to adequately compensate for a tailwind condition on liftoff from the helipad.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for MIA98TA243)
THE PILOT'S FAILURE TO MAINTAIN AN ADEQUATE PATTERN ALTITUDE AND THE POSSIBLE EXISTENCE OF ADVERSE WINDS DUE TO THE SURROUNDING TERRAIN.
From NTSB records; matched by serial number.Read NTSB report (search CAROL for DEN90LA180)
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 2009-12-01 | Bell Helicopter Textron, Inc. Model 47, 47B, 47B3, 47D, 47D1, 47E, 47G, 47G-2, 47G-2A… | Jun 29, 2009 | Airframe (47G-3B-1)Only with: Main rotor blade installed: P/N 047-110-250-021 with S/N A-303, A-304, A-312, or A-316; or P/N 047-110-250-023 with S/N A-298, A-301, or A-305. |
| 2006-16-04 | Rolls-Royce Corporation (Formerly Allison Engine Company, Allison Gas Turbine Division… | Sep 7, 2006 | Engine (250-C20) |
| 2006-13-06 | Rolls-Royce Corporation (Formerly Allison Engine Company, Allison Gas Turbine Division… | Jul 26, 2006 | Engine (250-C20)Only with: Engines with gas producer rotor assembly tie bolt P/Ns A23008020, E23008020 (EXTEX), 23008020, 6843388, 6876991 (RRC), A23008020 (SAP), or 23008020P (Pacific Sky Supply) installed. |
| 2005-10-13 | Rolls-Royce Corporation (Formerly Allison Engine Company) 250-B17B, -B17C, -B17D, -B17E… | Jun 22, 2005 | Engine (250-C20)Only with: Engines that do not have turbine energy absorbing ring RRC P/N 23035175, or an equivalent FAA-approved serviceable ring, installed. |
| 2001-17-17 | Bell Helicopter Textron, Inc. Model 47B, 47B-3, 47D, 47D-1, 47G, 47G-2, 47G2A, 47G-2A-1… | Aug 29, 2001 | Airframe (47G-3B-1)Only with: Main rotor blade grips P/N 47-120-135-2, 47-120-135-3, 47-120-135-5, 47-120-252-1, 47-120-252-7, 47-120-252-11, 74-120-252-11, 74-120-135-5, R47-120-252-11, or R47-120-135-5 installed. |
| AD | Subject | Effective | Applies to |
|---|---|---|---|
| 98-07-09 | Bell Helicopter Textron, Inc. Model 47B, 47B-3, 47D, 47D-1, 47G, 47G-2, 47G-2A… | May 6, 1998 | Airframe (47G-3B-1) |
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
No Service Difficulty Reports found for this airframe since 1995.