We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Airframe & engine
FAA Registry + type data
Airframe
Manufacturer
Cub Crafters
Model
CC18-180
Year
2008
Serial number
CC18-0035
Aircraft type
Fixed wing single engine
Category
Land
Certification
Type Certificated
Seats
2
Engines
1
Max takeoff weight
Up to 12,499 lb
Mode S code
A0FB20
Engine
Make and model
Lycoming O-360-C4p
Type
Reciprocating
Power
180 hp
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Ownership history
Ownership history from FAA records
2009 – 2015Usda-Aphis-WsCedar City, UT
Individual owners are shown by city and state only.
Safety record
NTSB · Oct 15, 2026 · FAA ADs · Oct 17, 2026 · SDRs · Oct 16, 2026
NTSB events (1)
Accident · substantial damage
Jun 5, 2015 · Raton, NM
The pilot's failure to maintain adequate airspeed while maneuvering at a low altitude, which resulted in the airplane exceeding its critical angle of attack and experiencing an aerodynamic stall.
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
Engine (O-360-C4P)Only with: ECi connecting rods P/N AEL11750 (forging P/N AEL11488) installed, rod serial numbers 54/6 and below, produced between January 2002 and January 2004.
Engine (O-360-C4P)Only with: Engines rated at 300 HP or lower, manufactured new, rebuilt, or overhauled after March 1, 1999, or that had a crankshaft installed after March 1, 1999.
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Service Difficulty Reports (0)
No Service Difficulty Reports found for this airframe since 1995.