We never show street addresses, even though they appear in the public FAA file. Individual owners are shown by city and state only.
Airframe & engine
FAA Registry + type data
Airframe
Manufacturer
Aeronca
Model
7AC
Year
1946
Serial number
7AC-4646
Aircraft type
Fixed wing single engine
Category
Land
Certification
Type Certificated
Seats
2
Engines
1
Max takeoff weight
Up to 12,499 lb
Mode S code
A0290C
Engine
Make and model
Cont Motor A&C65 Series
Type
Reciprocating
Power
65 hp
Total time and engine hours aren't public. They appear here once the owner adds logbooks.
Ownership history
Ownership history from FAA records
2020 – nowIndividual ownerTerrell, TX · current
Individual owners are shown by city and state only.
Safety record
NTSB · Oct 15, 2026 · FAA ADs · Oct 20, 2026 · SDRs · Oct 16, 2026
NTSB events (1)
Accident · substantial damage
Aug 9, 1983 · Kenton, TN
THE PILOT STATED THAT WHILE FLYING LOW AND SLOW TO OBSERVE CROPS, THE AIRCRAFT STALLED DURING A TURN. THE NOSE WAS LOWERED WHICH PLACED THE ACFT ON A HEADING FOR A LARGE OAK TREE. A TURN WAS ATTEMPTED TO AVOID THE TREE; THE ACFT STALLED AGAIN, STRUCK TREE LIMBS, AND HIT THE GROUND.
These match the airframe or engine model. Whether each one applies, and whether it's been complied with, depends on serial numbers, equipment and logbook entries. Applicability must be confirmed by a mechanic against the aircraft's records.
No ADs published since 1998 matched this airframe or engine model.
AI-extracted — verify against original. Matched from each AD's applicability section; ADs replaced by a later AD are left out.
Service Difficulty Reports (0)
No Service Difficulty Reports found for this airframe since 1995.