Airworthiness Directive

AD 2025-05-16: Fuselage

Airworthiness Directives; The Boeing Company Airplanes

Effective: Apr 22, 2025
Published: Mar 18, 2025
Registered aircraft: 157

Models this AD may apply to

AI-extracted — verify against original

Matched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.

Aircraft

Serial numbers per Group A in Section 5.2.1, Effectivity, of Boeing 737-800BCF Airworthiness Limitations, D140A006, Revision L, dated April 1, 2021. Only with: Airplanes converted to freighter configuration (737-800BCF) using Boeing Drawing 800A0003 before April 1, 2021.
Only with: Airplanes converted to freighter configuration (737-800BCF) using Boeing Drawing 800A0003 before April 1, 2021.

Applicability

From the AD text

(1) This AD applies to The Boeing Company Model 737-800 series airplanes, certificated in any category, that have been converted to a freighter configuration using Boeing Drawing 800A0003 before April 1, 2021, and are identified as Group A in Section 5.2.1, ``Effectivity,'' of Boeing 737-800BCF Airworthiness Limitations, D140A006, Revision L, dated April 1, 2021. Note 1 to paragraph (c)(1): Airplanes with a 737-800BCF designation are Model 737-800 series airplanes that have been converted to a freighter configuration using Boeing Drawing 800A0003. (2) Installation of Supplemental Type Certificate (STC) ST00830SE does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST00830SE is installed, a ``change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.

Read the AD in the Federal Register Report an error on this page