Airworthiness Directive
AD 2021-10-19: Flight Controls; 52, Doors; 53, Fuselage; 54, Nacelles/pylons; 55, Stabilizers; 57, Wings
Airworthiness Directives; The Boeing Company Airplanes
- Effective
- Jul 1, 2021
- Published
- May 27, 2021
- Registered aircraft
- 176
Models this AD may apply to
AI-extracted — verify against originalMatched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.
Aircraft
- Boeing 767-200
- Boeing 767-200ER
- Boeing 767-200SF
- Boeing 767-300
- Boeing 767-300ER
- Boeing 767-300F
- Boeing 767-300F
- Certain serial numbers: 1–1218. Only with: Line numbers 1 through 1218 inclusive; airplanes with STC ST01920SE installed may need a change-in-product AMOC.
- Only with: Line numbers 1 through 1218 inclusive; airplanes with STC ST01920SE installed may need a change-in-product AMOC.
Applicability
From the AD text(1) This AD applies to The Boeing Company Model 767-200, -300, -300F, and -400ER series airplanes, certificated in any category, line numbers 1 through 1218 inclusive. (2) Installation of Supplemental Type Certificate (STC) ST01920SE affects the ability to accomplish some of the actions required by this AD. Therefore, for airplanes on which STC ST01920SE is installed, a ``change in product'' alternative method of compliance (AMOC) approval may be necessary to comply with the requirements of 14 CFR 39.17.
Read the AD in the Federal RegisterReport an error on this page