Skip to content
KnownTail
Airworthiness Directive

AD 2020-18-20: MD Helicopters Inc. (MDHI), Helicopters

Airworthiness Directives; MD Helicopters Inc. (MDHI), Helicopters

Effective
Oct 28, 2020
Published
Sep 23, 2020
Registered aircraft
132

Models this AD may apply to

AI-extracted — verify against original

Matched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.

Aircraft

  • Only with: With MR blade P/N 500P2100-105, 500P2100-305, 500P2300-505, 369D21120-505, 369D21121-505, or 369D21123-505 having a 1.25 inch chord nickel abrasion strip manufactured or installed by HTC or of unknown manufacturer, with less than 700 hours TIS on the abrasion strip.
  • Only with: With MR blade P/N 500P2100-105, 500P2100-305, 500P2300-505, 369D21120-505, 369D21121-505, or 369D21123-505 having a 1.25 inch chord nickel abrasion strip manufactured or installed by HTC or of unknown manufacturer, with less than 700 hours TIS on the abrasion strip.

Applicability

From the AD text
This AD applies to MD Helicopters Inc. (MDHI) Model 369A, 369D, 369E, 369FF, 369H, 369HE, 369HM, 369HS, 500N, and 600N helicopters, certificated in any category, with a main rotor (MR) blade part number (P/N) 500P2100-105, P/N 500P2100-305, P/N 500P2300-505, P/N 369D21120-505, P/N 369D21121-505, or P/N 369D21123-505 with a 1.25 inch chord length nickel abrasion strip (abrasion strip) manufactured or installed by Helicopter Technology Company, LLC (HTC), or where the manufacturer of the abrasion strip is unknown. This AD does not apply if the abrasion strip has accumulated 700 or more hours time-in-service (TIS).

Read the AD in the Federal RegisterReport an error on this page