Skip to content
KnownTail
Airworthiness Directive

AD 2020-06-13: Airbus Helicopters

Airworthiness Directives; Airbus Helicopters

Effective
May 11, 2020
Published
Apr 6, 2020
Registered aircraft
3

Models this AD may apply to

AI-extracted — verify against original

Matched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.

Aircraft

  • Airbus Helicopters AS332C1
  • Airbus Helicopters AS332L1
  • Only with: With MGB suspension bar RH rear fitting P/N 330A22-2702-07 and bolt P/N 330A22-0135-20, LH rear fitting P/N 330A22-2702-06 and bolt P/N 330A22-0135-20, or front bolt P/N 330A22-0134-20 installed.
  • Only with: With MGB suspension bar RH rear fitting P/N 330A22-2702-07 and bolt P/N 330A22-0135-20, LH rear fitting P/N 330A22-2702-06 and bolt P/N 330A22-0135-20, or front bolt P/N 330A22-0134-20 installed.

Applicability

From the AD text
This AD applies to Airbus Helicopters Model AS332C, AS332C1, AS332L, and AS332L1 helicopters, certificated in any category, with a main gearbox (MGB) suspension bar right-hand side (RH) rear attachment fitting (fitting) part number (P/N) 330A22-2702-07 and bolt P/N 330A22-0135-20, MGB suspension bar left-hand side (LH) rear fitting P/N 330A22-2702-06 and bolt P/N 330A22-0135-20, or MGB suspension bar front bolt P/N 330A22-0134-20 installed.

Related ADs

Superseded or revised by AD 2025-23-01.

Read the AD in the Federal RegisterReport an error on this page