Airworthiness Directive
AD 2017-20-05: Fuselage
Airworthiness Directives; The Boeing Company Airplanes
- Effective
- Nov 6, 2017
- Published
- Oct 2, 2017
- Registered aircraft
- 7
Models this AD may apply to
AI-extracted — verify against originalMatched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.
Aircraft
- Boeing 757-200 SERIES
- Boeing 757-200CB
- Boeing 757-200PF
- Boeing 757-200SF
- Boeing 757-300
- Serial numbers per Boeing Special Attention Service Bulletin 757-53-0097, Revision 3, dated December 2, 2016
Applicability
From the AD text(1) This AD applies to The Boeing Company Model 757-200 and -300 series airplanes, certificated in any category, as identified in Boeing Special Attention Service Bulletin 757-53-0097, Revision 3, dated December 2, 2016. (2) Installation of Supplemental Type Certificate (STC) ST01518SE (http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgSTC.nsf/0/38B606833BBD98B386257FAA00602538?OpenDocument&Highlight=st01518se) does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST01518SE is installed, a ``change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.
Related ADs
Supersedes or revises AD 2011-01-15.
Read the AD in the Federal RegisterReport an error on this page