Airworthiness Directive
AD 2013-13-08: Wings
Airworthiness Directives; The Boeing Company Airplanes
- Effective
- Aug 20, 2013
- Published
- Jul 16, 2013
- Registered aircraft
- 176
Models this AD may apply to
AI-extracted — verify against originalMatched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.
Aircraft
- Boeing 767-200
- Boeing 767-200ER
- Boeing 767-200SF
- Boeing 767-300
- Boeing 767-300ER
- Boeing 767-300F
- Boeing 767-300F
- Serial numbers per Boeing Service Bulletin 767-57A0100, Revision 3, and Boeing Service Bulletin 767-57A0102, Revision 4
Applicability
From the AD text(1) This AD applies to The Boeing Company Model 767-200, -300, -300F, and -400ER series airplanes; certificated in any category; as identified in Boeing Service Bulletin 767-57A0100, Revision 3, dated July 28, 2011; and Boeing Service Bulletin 767-57A0102, Revision 4, dated September 20, 2011. (2) Installation of Supplemental Type Certificate (STC) ST01920SE (http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgstc.nsf/0/59027F43B9A7486E86257B1D006591EE?OpenDocument&Highlight=st01920se) does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST01920SE is installed, a ``change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.
Related ADs
Supersedes or revises AD 2009-18-02.
Read the AD in the Federal RegisterReport an error on this page