Airworthiness Directive

AD 2013-08-16: Fuselage

Airworthiness Directives; The Boeing Company Airplanes

Effective: Jun 5, 2013
Published: May 1, 2013
Registered aircraft: 5

Models this AD may apply to

AI-extracted — verify against original

Matched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.

Aircraft

Boeing 737-700

Serial numbers per Boeing Service Bulletin 737-53-1310, dated October 20, 2011

Applicability

From the AD text

(1) This AD applies to The Boeing Company Model 737-700 and -700C series airplanes, certificated in any category, as identified in Boeing Service Bulletin 737-53-1310, dated October 20, 2011. (2) Installation of Supplemental Type Certificate (STC) ST00830SE (http://rgl.faa.gov/Regulatory_and_Guidance_Library/rgstc.nsf/0/408E012E008616A7862578880060456C?OpenDocument&Highlight=st00830se) does not affect the ability to accomplish the actions required by this AD. Therefore, for airplanes on which STC ST00830SE is installed, a ``change in product'' alternative method of compliance (AMOC) approval request is not necessary to comply with the requirements of 14 CFR 39.17.

Read the AD in the Federal Register Report an error on this page