Airworthiness Directive
AD 2008-10-07: Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300…
Airworthiness Directives; Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747SR, and 747SP Series Airplanes
- Effective
- Jun 12, 2008
- Published
- May 8, 2008
- Registered aircraft
- 3
Models this AD may apply to
AI-extracted — verify against originalMatched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.
Aircraft
- Boeing 747-100
- Boeing 747-100B
- Boeing 747-100B-SUD
- Boeing 747-200B
- Boeing 747-200C
- Boeing 747-200F
- Boeing 747-300 SERIES
- Boeing 747-SP38
- Boeing 747-SP44
- Boeing 747-SP68
- Boeing 747-SP70
- Boeing 747-SP86
- Boeing 747-SP94
- Boeing 747-SPB5
- Boeing 747-SPZ5
- Boeing 747-SR
- Boeing 747-SR-46
- Boeing 747-SR-81
- Boeing 747SP-09
- Boeing 747SP-21
- Boeing 747SP-27
- Boeing 747SP-31
- Boeing 747SP-J6
- Boeing 747SR-100
Applicability
From the AD textThis AD applies to all Boeing Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747SR, and 747SP series airplanes, certificated in any category. Note 1: This AD requires revisions to certain operator maintenance documents to include new inspections. Compliance with these inspections is required by 14 CFR 91.403(c). For airplanes that have been previously modified, altered, or repaired in the areas addressed by these inspections, the operator may not be able to accomplish the inspections described in the revisions. In this situation, to comply with 14 CFR 91.403(c), the operator must request approval for an alternative method of compliance (AMOC) according to paragraph (k) of this AD. The request should include a description of changes to the required inspections that will ensure the continued operational safety of the airplane.
Related ADs
Superseded or revised by AD 2008-10-07 R1.
Read the AD in the Federal RegisterReport an error on this page