Airworthiness Directive
AD 2005-12-04: Boeing Model 757-200, -200PF, and -200CB Series Airplanes
Airworthiness Directives; Boeing Model 757-200, -200PF, and -200CB Series Airplanes
- Effective
- Jun 29, 2005
- Published
- Jun 14, 2005
- Registered aircraft
- 7
Models this AD may apply to
AI-extracted — verify against originalMatched from the AD's applicability section. Applicability must be confirmed by a mechanic against the aircraft's records.
Aircraft
- Boeing 757-200 SERIES
- Boeing 757-200CB
- Boeing 757-200PF
- Boeing 757-200SF
- Certain serial numbers: 1–1048. Only with: Line numbers 1 through 1048 inclusive, powered by Rolls Royce engines.
- Only with: Line numbers 1 through 1048 inclusive, powered by Rolls Royce engines.
Applicability
From the AD text(c) This AD applies to Boeing Model 757-200, -200PF, and -200CB series airplanes; certificated in any category; line numbers 1 through 1048 inclusive; powered by Rolls Royce engines. Unsafe Condition (d) This AD was prompted by reports of cracks, loose and broken bolts, and shim migration in the joint between the aft torque bulkhead and the strut-to-diagonal brace fitting. The FAA is issuing this AD to detect and correct such conditions, which could result in damage to the strut and consequent separation of the strut and engine from the airplane.
Related ADs
Superseded or revised by AD 2007-16-13.
Read the AD in the Federal RegisterReport an error on this page